R2 Hanging Rotators


The R2 is a continuous rotation rotator where the oil to open and close the grapple is run through the rotator to the outlets on the axle. The rotator has a grease fitting for hookup pin of the hanger. The hose guard protects the hoses from damage.

• The rotators come with JIC fittings. Hook up is easy, as symbols on the rotator describe the functions of each outlet.


Technical Specs

Unlimited in Either Direction
Max Load
4400 lbs
Max Working Pressure
2900 psi
369 ft lb
29 lbs
Pin Size

Technical Specs

A) Width of Block
1.6" (40.5 mm)
B) Upper Pinhole
0.8" (20 mm)
C) Axle Diameter
1.6" (40.5 mm)
D) Lower Pinhole
0.8" (20 mm)
E) Height
8.9" (226 mm)
JIC 7/4" 16