Phone: 1-866-638-7885  
E-Mail: sales@ThreeRiversForestry.com  

 
Home Farmi Skidding Winches Tractor Mounted Chippers Valby Grapples Valby Skid Steer Grapples Knuckleboom Loaders Valby Ice Chains

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
 

Click Here
to compare Farmi winches with others

 

 
Farmi Mastersplit Wood Processor
WP30CS_ni
 
WP30CS - The Farmi Mastersplit WP30CS has an optional hydraulic lift, v-shaped feeding platform, does cross-cutting (13 inch) and and splitting.
 
FARMI Mastersplit WP 30CS’s unique patented feeding platform makes the job easier and faster. You simply operate the cross-cutting lever and the stem moves along on the feeding platform.
 
The hydraulic lifter (optional item) lifts the stems from the pile on to the feeding platform for processing. This way there’s less strain on your back and your arms.

Hydraulic Lifter
 
A V-shaped feeding platform is part of the standard equipment in all of the models and keeps the tree stems in place during processing. Cross cutting is done lightly and quietly by a chainsaw function. Chainsaw is running only during cutting. Automatic lubrication of chain by pump.
 
Once the pieces are split they are carried along a conveyor to the drop area. The standard conveyor is on a hinge which allows the operator to swing the conveyor side-to-side.
 
Technical Specs:
Cross Cutting By Chainsaw   13"
Drive of Chainsaw   hydraulic
Cross cutting speed normal action   2.4 sec
Cross cutting speed rapid action   1.6 sec
Splitting Force   3.8 / 6 tons
Stem Diameter   Max 11 3/4"
Length of Split Wood   Max 23 1/2"
Conveyor Belt Width   9 1/3"
Conveyor Length   13' 2"
Drive of Conveyor   hydraulical
Weight   990 lbs
Power Requirement   10 hp
Power Source   Tractor / Electric Motor / Combustion Motor
 
schematic
When in its transport position, the conveyor is locked over the machine.
 
 
 
 
WP36CS - The Farmi Mastersplit WP30CS has an optional hydraulic lift, v-shaped feeding platform, does cross-cutting (15 inch) and and splitting.
 
FARMI Mastersplit WP 30CS’s unique patented feeding platform makes the job easier and faster. You simply operate the cross-cutting lever and the stem moves along on the feeding platform.
 
The hydraulic lifter (optional item) lifts the stems from the pile on to the feeding platform for processing. This way there’s less strain on your back and your arms.

Hydraulic Lifter
 
A V-shaped feeding platform is part of the standard equipment in all of the models and keeps the tree stems in place during processing. Cross cutting is done lightly and quietly by a chainsaw function. Chainsaw is running only during cutting. Automatic lubrication of chain by pump.
 
Once the pieces are split they are carried along a conveyor to the drop area. The standard conveyor is on a hinge which allows the operator to swing the conveyor side-to-side.
 
Technical Specs:
Cross Cutting By Chainsaw   15"
Drive of Chainsaw   hydraulic
Cross cutting speed normal action   1.5 sec
Cross cutting speed rapid action   1.0 sec
Splitting Force   76 tons
Stem Diameter   Max 14 1/8"
Length of Split Wood   Max 23 1/2"
Conveyor Belt Width   9 1/3"
Conveyor Length   13' 2"
Drive of Conveyor   hydraulical
Weight   1150 lbs
Power Requirement   10 hp
Power Source   Tractor / Electric Motor / Combustion Motor
 
schematic
When in its transport position, the conveyor is locked over the machine.
 
 
 
 
 

Powered by: MCS Networks