Phone:
1-866-638-7885
E-Mail:
sales@ThreeRiversForestry.com
| Home | Farmi Skidding Winches | Tractor Mounted Chippers | Valby Grapples | Valby Skid Steer Grapples | Knuckleboom Loaders | Valby Ice Chains |
            
Click Here
|
|
|
||
| Time Saving Skidding Accessories | ||
| 1. | Skidding
Chains |
|
|
Pulling out the winch cable and carrying the chains
to the felled trees has typically been the heaviest part of a skidder
operation. The unique Farmi sensor and brake system has made the
pulling out of the cable very easy. The Farmi skidding chains are
lightweight but strong as they are made of top quality materials such as
boron steel. A timesaving primer pin is fastened to the chains. This
primer pin makes it easier to pass the chain underneath a felled tree.
The pin is first pushed underneath the tree and then the chain is pulled
through from the pin. |
||
| JK 208 Boron steel skidding chain assembly, 9" long primer pin, 68" long chain with choker hook. Breaking strength 10,200 lbs. For use on Farmi JL290, JL351 models. Weight: 4.5 lbs. |
) |
|
| JK 249 Skidding chain assembly 5/16", 9" long primer pin, 80" long chain with choker hook. Breaking strength 18,800 lbs. For use on all Farmi models. Weight 9lbs. | ||
| JK 300 Skidding chain assembly 5/16", 9" long primer pin, 8' long chain with choker hook. Breaking strength 18,800 lbs. For use on all Farmi models. Weight: 8lbs. |
) |
|
| JK 800 Skidding chain assembly 3/8". Grade 800 alloy chain, 8' long with choker hook. Breaking strength: 28,200 lbs. For use on skidders and Farmi JL601, JL60T, and JL2/601 winch models. Weight: 15 lbs. |
) |
|
| 2. | Choker
Hooks |
|
| The H7 choker hook fits 1/4" chain. |
) |
|
| The H8 choker hook fits 5/16" chain. |
|
|
| The H10 choker hook fits 3/8" chain. |
|
|
| 3. | Farmi
Self-Releasing Snatch block TP14 |
|
| When obstacles prevent direct winching, or when the remaining trees are to be protected from damage, a self-releasing snatch block should be used. The Farmi snatch block releases the cable when the keyhole slider reaches it. The snatch block is attached to an anchor tree with a nylon strap which prevents damage to the tree. The automatic cable release works only when the pulley is turned upside down, which is when the release mechanism is facing the ground. The self-releasing snatch block can be used with 9/16" and smaller cable. |
) |
|
| 4. | Farmi
Keyhole Sliders LL2, LL6 |
|
| The Farmi keyhole sliders are used with the Farmi skidding chains. The JL60T, JL601, and JL2/601 have LL6 keyhole sliders. All other models have LL2 keyhole sliders. | ||
| The LL2 size is used for cable up to 1/2" and skidding chains up to 5/16". |
 |
|
| The LL6 size is used for cable up to 3/4" and skidding chains from 5/16" to 7/16". |
|
|
| 5. | Remote
Control Reel NK45 |
|
| The remote control reel can be used with all Farmi winches. The reel has 145' of nylon rope which is automatically rewound onto the reel. The case is made of impact resistant plastic. | ||
| Weight: 6 ½ lbs. | ||
| The remote control reels should not be used in adverse weather such as snow or ice storms or in environment where the rope can come in contact with branches or trees. The operator should walk on the side of the load at a distance where he is safe from eventual breakage of skidding chains or the cable. | ||
| 6. | Replacement Cables For Farmi Winches | |
|
V10 The V10 cable is a 3/8" diameter 6 x 25 IWRC type with a breaking strength of approximately 13,110 lbs., The cable is 165 feet long. It is used as a replacement in the following Farmi winch models: JL 20, JL 25, JL 30, JL 250, JL 256, JL 290, JL 300, JL 303, JL 306, JL 351, JL 400. V12-145 and V12-165 The V12 cables have a 1/2" diameter and are of 6 x 25 IWRC type. The breaking strength is approximately 23,000 lbs. The cable is available in 145' and 165' lengths. This cable is used in the following Farmi winch models: JL 45, JL 453, JL 456, JL 50, JL 500, JL 501. V14 The V 14 cable has a diameter of 9/16". It is of 6 x 25 IWRC type. The breaking strength is approximately 29,000 lbs. The cable is 165' long. It is used as a replacement in the following Farmi winch models: JL 60T, JL 600, JL 601. |
||
| 7. | LK2 Hook for the end of the cable. |
) |
| 8. | A protective screen which bolts on to the winch is available for all current Farmi winches. The protective screen is necessary if the operator is sitting on the tractor when winching. The screen protects the operator from injury which could be caused by a breaking cable or skidding chain. | |
| For picture of screen for the JL290, JL351 and JL 351P winches, |
) |
|
| For picture of screen for the JL501 and JL601 model winches, |
) |
|
| The
protective screen does not provide roll-over protection
|
 |
|
Powered by: MCS Networks